< Retour

Security rail system

Description
Application
Options
The security rail system is a protection device against falls from height. It is composed of a rigid rail profile in anodized aluminum and a stainless steel ball bearing shuttle. By sliding on the rail without intermediate obstacles, the shuttle gives the user a great freedom of movement, in total safety. The rail system is designed to be used in 3 directions: on roofs, façades or overhead. It complies with standard EN795 class D.
Download product data sheet : insert_drive_file
Download complete catalog : insert_drive_file

Products of the range

Lifeline with shuttle for concrete deck
The lifeline with shuttle on standard posts for concrete deck is a horizontal anchor device that can be installed on roof terraces, facade. The operators move along the entire length of the lifeline by passing the intermediate and angle supports with a stainless steel shuttle without unhooking. This device is easy to use, easy to install and complies with standard EN795: 2012 Class C.
Product sheet
Lifeline for concrete deck
The lifeline on standard posts for concrete deck is a horizontal anchor device that can be installed on roof terraces, facade. The operators move along the entire length of the lifeline by passing the intermediate supports with a simple carabiner without unhooking. This device is easy to use, easy to install and complies with standard EN795: 2012 Class C.
Product sheet
Lifeline for metallic/wood bean (standard clamping)
The lifeline on standard posts for metallic/wood beam (standard clamping) is a horizontal anchor device that can be installed on metallic or wooden beam, roofs, facade or overhead. The operators move along the entire length of the lifeline by passing the intermediate supports with a simple carabiner without unhooking. This device is easy to use, easy to install and complies with standard EN795: 2012 Class C.
Product sheet
Lifeline with shuttle for metallic/wood bean (standard clamping)
The lifeline with shuttle on standard posts for metallic/wood beam (standard clamping) is a horizontal anchor device that can be installed on metallic or wooden beam, roofs, facade or overhead. The operators move along the entire length of the lifeline by passing the intermediate and angle supports with a stainless steel shuttle without unhooking. This device is easy to use, easy to install and complies with standard EN795: 2012 Class C.
Product sheet
Lifeline for metallic/wood bean (flange clamping)
The lifeline on standard posts for metallic beam flanges clamping) is a horizontal anchor device that can be installed on metallic beam, roofs, facade or overhead. The operators move along the entire length of the lifeline by passing the intermediate supports with a simple carabiner without unhooking. This device is easy to use, easy to install and complies with standard EN795: 2012 Class C.
Product sheet
Lifeline with shuttle for metallic/wood bean (flange clamping)
The lifeline with shuttle on standard posts for metallic beam flanges clamping) is a horizontal anchor device that can be installed on metallic beam, roofs, facade or overhead. The operators move along the entire length of the lifeline by passing the intermediate and angle supports with a stainless steel shuttle without unhooking. This device is easy to use, easy to install and complies with standard EN795: 2012 Class C.
Product sheet
Lifeline for glue laminated timber beam
The lifeline on standard posts for glue laminated timber beam is a horizontal anchor device that can be installed on glue laminated timber beam, roofs, facade or overhead. The operators move along the entire length of the lifeline by passing the intermediate supports with a simple carabiner without unhooking. This device is easy to use, easy to install and complies with standard EN795: 2012 Class C.
Product sheet
Lifeline with shuttle for glue laminated timber beam
The lifeline with shuttle on standard posts for glue laminated timber beam is a horizontal anchor device that can be installed on glue laminated timber beam, roofs, facade or overhead. The operators move along the entire length of the lifeline by passing the intermediate supports with a simple carabiner without unhooking. This device is easy to use, easy to install and complies with standard EN795: 2012 Class C.
Product sheet
Wall mounted lifeline
The wall mounted lifeline is a horizontal anchor device that can be installed on a vertical surface like a concrete wall or a structural vertical metallic beam. The operators move along the entire length of the lifeline by passing the intermediate supports with a simple carabiner without unhooking. This device is easy to use, easy to install and complies with standard EN795: 2012 Class C.
Product sheet
Wall mounted lifeline with shuttle
The wall mounted lifeline with shuttle is a horizontal anchor device that can be installed on a vertical surface like a concrete wall or a structural vertical metallic beam. The operators move along the entire length of the lifeline by passing the intermediate and angle supports with a stainless steel shuttle without unhooking. This device is easy to use, easy to install and complies with standard EN795: 2012 Class C.
Product sheet
Overhead lifeline
The overhead lifeline is a horizontal anchor device that can be installed overhead, with chemical fixings, or by standard or flanges clamping. The operators move along the entire length of the lifeline by passing the intermediate and angle supports with a stainless steel shuttle without unhooking. The ball bearing shuttle allows the use of lifeline at great height from the operator. This device is easy to use, easy to install and complies with standard EN795: 2012 Class C.
Product sheet
Lifeline for steel deck roofing
The lifeline for steel deck roofing is a horizontal anchor device that can be installed on a metallic beam directly through the steel deck. The operators move along the entire length of the lifeline by passing the intermediate supports with a simple carabiner without unhooking. This device is easy to use, easy to install and complies with standard EN795: 2012 Class C.
Product sheet
Lifeline with shuttle for steel deck roofing
The lifeline with shuttle for steel deck roofing is a horizontal anchor device that can be installed on a metallic beam directly through the steel deck. The operators move along the entire length of the lifeline by passing the intermediate and angle supports with a stainless steel shuttle without unhooking. This device is easy to use, easy to install and complies with standard EN795: 2012 Class C.
Product sheet
Lifeline for fibrecement roofing
The lifeline for fibrecement roofing is a horizontal anchor device that can be installed on a metallic beam directly through the steel deck. The operators move along the entire length of the lifeline by passing the intermediate supports with a simple carabiner without unhooking. This device is easy to use, easy to install and complies with standard EN795: 2012 Class C.
Product sheet
Lifeline with shuttle for fibrecement roofing
The lifeline with shuttle for fibrecement roofing is a horizontal anchor device that can be installed on a metallic beam directly through the steel deck. The operators move along the entire length of the lifeline by passing the intermediate and angle supports with a stainless steel shuttle without unhooking. This device is easy to use, easy to install and complies with standard EN795: 2012 Class C.
Product sheet
Vertical Lifeline
The vertical lifeline system is a protection device against falls from height. This device consists of a mobile fall arrest shuttle running on a stainless steel cable. This cable is fixed to the host structure at both ends. This device can only support 1 user at a time. Complies with standard EN 353-1.
Product sheet
Vertical Fall arrest rail system
The vertical fall arrester rail GM is a fall protection device that allows the user to travel on vertical structures. This device consists of a fall arrest shuttle running on an aluminium rail. This device can only support 1 user at a time. Complies with standard EN 353-1.
Product sheet

Associated products

Lifeline with shuttle for concrete deck
The lifeline with shuttle on standard posts for concrete deck is a horizontal anchor device that can be installed on roof terraces, facade. The operators move along the entire length of the lifeline by passing the intermediate and angle supports with a stainless steel shuttle without unhooking. This device is easy to use, easy to install and complies with standard EN795: 2012 Class C.
Product sheet
Standard post fixing on concrete
The standard anchorage post is a protection device against falls from height. It complies with the requirements of standard EN795 class A and has been designed to allow an operator to connect with personal protective equipment in compliance with the standards in force. The post is supplied with a bolted anchorage fix 1 , oblong holes to make the installation very easy, and a removable plastic flange to meet the industry standards for waterproofing.
Product sheet
Lifeline for concrete deck
The lifeline on standard posts for concrete deck is a horizontal anchor device that can be installed on roof terraces, facade. The operators move along the entire length of the lifeline by passing the intermediate supports with a simple carabiner without unhooking. This device is easy to use, easy to install and complies with standard EN795: 2012 Class C.
Product sheet
Guardrail on posts
GM's guardrail fixing on posts consists of an aluminum profiled support. The superior and inferior rails are 38.6 mm and 28.4 mm diameter aluminum tubes, located at least 1000mm from the ground and spaced by 500mm. The set of adjustments as well as the horizontality are ensured by a bar sliding in the profiled The guardrail's verticality can be corrected by a system of grub screws which make it possible to adapt to the differences of level of the parapet. The guardrail adapts to all configurations with its connecting accessories.
Product sheet
Anchor and Fixing tester
Portable system allowing the testing of anchorages.
Product sheet
Standard post fixing with flange clamping
The standard anchorage post, fixed with flange clamping, is a protection device against falls from height. It complies with the requirements of standard EN795 class A and has been designed to allow an operator to connect with personal protective equipment in compliance with the standards in force. The post is supplied with a bolted anchorage fix 1 , oblong holes to make the installation very easy, and a removable plastic flange to meet the industry standards for waterproofing.
Product sheet
Lifeline for metallic/wood bean (flange clamping)
The lifeline on standard posts for metallic beam flanges clamping) is a horizontal anchor device that can be installed on metallic beam, roofs, facade or overhead. The operators move along the entire length of the lifeline by passing the intermediate supports with a simple carabiner without unhooking. This device is easy to use, easy to install and complies with standard EN795: 2012 Class C.
Product sheet
Lifeline with shuttle for metallic/wood bean (flange clamping)
The lifeline with shuttle on standard posts for metallic beam flanges clamping) is a horizontal anchor device that can be installed on metallic beam, roofs, facade or overhead. The operators move along the entire length of the lifeline by passing the intermediate and angle supports with a stainless steel shuttle without unhooking. This device is easy to use, easy to install and complies with standard EN795: 2012 Class C.
Product sheet
Standard post for glue laminated timber beam
The standard anchorage post, fixed on glue laminated timber beam, is a protection device against falls from height. It complies with the requirements of standard EN795 class A and has been designed to allow an operator to connect with personal protective equipment in compliance with the standards in force. The post is supplied with a bolted anchorage fix 1 , oblong holes to make the installation very easy, and a removable plastic flange to meet the industry standards for waterproofing.
Product sheet
Lifeline for glue laminated timber beam
The lifeline on standard posts for glue laminated timber beam is a horizontal anchor device that can be installed on glue laminated timber beam, roofs, facade or overhead. The operators move along the entire length of the lifeline by passing the intermediate supports with a simple carabiner without unhooking. This device is easy to use, easy to install and complies with standard EN795: 2012 Class C.
Product sheet
Lifeline with shuttle for glue laminated timber beam
The lifeline with shuttle on standard posts for glue laminated timber beam is a horizontal anchor device that can be installed on glue laminated timber beam, roofs, facade or overhead. The operators move along the entire length of the lifeline by passing the intermediate supports with a simple carabiner without unhooking. This device is easy to use, easy to install and complies with standard EN795: 2012 Class C.
Product sheet
SOLAR Anchorage
The SOLAR anchorage is a protection device against falls from height adapted to roofs covered with photovoltaic panels. It complies with the requirements of standard EN795 type A and has been designed to allow an operator to connect with personal protective equipment in compliance with the standards in force. The cable allows the user to move freely and can be hiden underneath the photovoltaic panels when not used to avoid shadow. It measures 650mm when not used and 740mm tensioned.
Product sheet
Disipator anchorage for Zinc roofing
The dissipator anchorage for zinc roofing is a protection device against falls from height. It complies with the requirements of standard EN795 class A and has been designed to allow an operator to connect with personal protective equipment in compliance with the standards in force. It is supplied with a free rotating plate (360°) to provide the user with a great freedom of movement. This plates comprises an energy dissipator which allows a limitation of the efforts on the host structure in case of a fall.
Product sheet
Absorber post on zinc roofing
The Absorber anchorage post for zinc roofing is a protection device against falls from height. It complies with the requirements of standard EN795 class A and has been designed to allow an operator to connect with personal protective equipment in compliance with the standards in force. An energy absorber is integrated in the post. This allows to reduce the efforts transmited to the host structure in case of a fall.
Product sheet
Lifeline for zinc roofing
The lifeline on absorber post for zinc roofing is a horizontal anchor device. An energy absorber is integrated in the post. This allows to reduce the efforts transmited to the host structure in case of a fall. Its installation is carried out without prior cutting of the covering complex. The operators (maximum 4 simultaneously) move along the entire length of the lifeline by passing the intermediate supports with a simple carabiner without unhooking. This device is easy to use, easy to install and complies with standard EN795: 2012 Class C.
Product sheet
Lifeline with shuttle for zinc roofing
The lifeline with shuttle on absorber post for zinc roofing is a horizontal anchor device. An energy absorber is integrated in the post. This allows to reduce the efforts transmited to the host structure in case of a fall. Its installation is carried out without prior cutting of the covering complex. The operators (maximum 4 simultaneously) move along the entire length of the lifeline by passing the intermediate and angle supports with a stainless steel shuttle without unhooking. This device is easy to use, easy to install and complies with standard EN795: 2012 Class C.
Product sheet
Disipator anchorage for standing seam
The dissipator anchorage for standing seam roofing is a protection device against falls from height. It complies with the requirements of standard EN795 class A and has been designed to allow an operator to connect with personal protective equipment in compliance with the standards in force. It is supplied with a free rotating plate (360°) to provide the user with a great freedom of movement. This plates comprises an energy dissipator which allows a limitation of the efforts on the host structure in case of a fall.
Product sheet
Absorber post on zinc standing seam
The Absorber anchorage post for standing seam zinc roofing is a protection device against falls from height. It complies with the requirements of standard EN795 class A and has been designed to allow an operator to connect with personal protective equipment in compliance with the standards in force. An energy absorber is integrated in the post. This allows to reduce the efforts transmited to the host structure in case of a fall.
Product sheet

Search products

Contact us

assignment
assignment_ind
location_on
location_on
business
phone
email
equalizer
message


  I accept the terms of the privacy policy of the website